RockBLOCK Plus
New flexible antenna RockBLOCK
RockBLOCK Plus
New flexible antenna RockBLOCK

RockBLOCK Plus Enclosed Waterproof Satellite IoT Device

$ 370.00$ 391.00

SKU: FP-GC-RB-PLUS Category:

The RockBLOCK+ allows you to send and receive short messages from anywhere on Earth with a clear view of the sky. It works far beyond the reach of WiFi and GSM networks.

It is a waterproof and ruggedized version of the RockBLOCK Naked product, with 9-30v power input and RS-232 data link.

Compatible with Windows, Mac and Linux computers (including Raspberry Pi), and many other platforms with serial or USB ports.

Short Burst Data Service Plans

Key Features

  • Plug and play satellite communication
  • Available as a PCB or encapsulated product
  • Full 2-way communication system
  • Integrated antenna and power conditioning
  • Powered via 9-30v DC, RS-232 for data
  • Truly global operation, pole to pole
  • Data via e-mail or directly to your web-service

Tech Specification

  • Powered By 3m 9-30v DC input
  • Built in Antenna: Yes
  • Transmits Using Iridium
  • Weight: 300 grams | Size 40mm high, 137mm diameter (+cable)
  • Waterproofing IP68 certified (submersible up to 1m indefinitely)
  • Ideal For External use
  • Powered via 9-30v DC, RS-232 for data


The RockBLOCK+ uses the Iridium Satellite network – specifically, ‘short burst data’ (SBD).

At the heart of RockBLOCK+ is an Iridium 9602 modem. The RockBLOCK hosts the 9602 and provides it with an antenna and its power supply requirements. It exposes the modem’s serial interface via RS-232 (or directly – PCB assembly version only). Full documentation for the Iridium 9602 modem can be found here.


What happens when the unit refuses to give me data using the SBDRT command?

If you’re using the SBDRT command and the modem appears to ‘hang’ when you issue the command, it’s probably due to flow control configuration. The default state for the RockBLOCK and RockBLOCK+ units has flow control turned ‘on’ in the modem. When running in 3-wire serial mode, flow control should be turned off, which will ensure you get responses to your requests.

Use the command AT&K0 at the start of your command sequence. This turns flow control off, and should solve the problem.

How do you control the sleep pin?

The sleep signal is internally pulled high on the RockBLOCK and RocKBLOCK+ products, so you can leave it disconnected if you want to leave the modem ‘awake’ all of the time. To turn ‘off’ the modem, pull the line to ground.

How is it powered?

RockBLOCK takes its power from the direct header connector, or alternatively via the optional FTDI/USB adaptor. If you’re using the PCB assembly version with a direct header, your host needs to supply a minimum of 100mA @ 5V.

How much data can I send/receive?

340 bytes from RockBLOCK.
270 bytes to RockBLOCK.

How quickly can I send a message?

Testing shows it generally takes around 20 seconds from power-up to successful transmission, with a perfect view of the sky. With a very restricted view, it may take several minutes. You should be able to complete an Iridium SBD session roughly every 10 seconds, assuming a perfect view of the sky.

Can I connect an external antenna?

Yes – there’s a version of the RockBLOCK available with an SMA connector (instead of the built-on antenna) which allows you to attach an external Iridium antenna.

Do you have USB drivers for my XYZ platform?

Almost certainly. If you’ve purchased the optional FTDI-USB adaptor then you’ll need to install the FTDI drivers. You can check on their website, where you’ll find drivers for Linux, Mac, Windows, Android, and others.

What about software?

The RockBLOCK appears as a serial interface and you can talk to it using a simple set of AT commands. It’s expected that you’ll be able to integrate it into your own software with minimal effort.

Could you give us some sample code to get started?

There is a Node.js library available and an Arduino library, which you can find here. There’s also an excellent Python project for Raspberry Pi, which would make a great starting point for any Raspberry Pi users, found here. We’re working on publishing some samples for other languages soon.

How do my messages get back to me?

Messages sent from RockBLOCK can either be delivered to your chosen email address or sent to your own web service as a simple HTTP POST. The message data will be hex-encoded so there are no character set problems. Full details of our web service are available in the Web Service Guide

How do I send data to my RockBLOCK?

You can make a simple HTTP POST to our web service. The message is queued on the satellite network almost instantly, ready for RockBLOCK to download (on your command).

Does RockBLOCK get notification of a new message waiting?

Yes, as long as you configure it correctly. Check the 9602 documentation for the ‘Ring Alert’ feature.

How rugged/waterproof is it really?

Very. The RockBLOCK+ is a completely encapsulated design, so it’s at least IP68 (submersible for extended periods). Just don’t expect it to send messages from underwater.

Do I get positions with my messages?

The RockBLOCK does not have a GPS chip inside it. It’s envisaged that if you want position reports, you’d use an off-the-shelf GPS module with your solution and get position data from that.

However, it’s worth noting that with each Iridium transmission we do get an approximate position report. This varies in accuracy from 100km to 1km and therefore can’t be relied upon for accurate tracking, but we do provide this information for you (along with the approximate accuracy, ‘CEP’, in km) with your messages. If you’re looking for a dedicated tracking satellite tracking device, you might want to consider our RockSTAR product.

If I have a whole set of RockBLOCKs, how does billing work?

Our billing is flexible and allows you to pay only when you’re using your devices. Line rental is sold in one-month blocks, and credits are bought in packs. If you have several RockBLOCKs, credits are shared from a credit pool amongst all your devices so you don’t need to buy separate packs of credits for each device. Similarly, if only some of your devices are being used at any one time, you don’t need to pay for line-rental on those which aren’t in use.

Do you guys know what you're doing?

Yes. Ground Control (formerly Rock Seven) has been an Iridium Partner since 2008. We’ve been developing all sorts of products, and we’re famously the people behind YB Tracking.


download.svgRockBLOCK+ Data Sheetdownload.svgRockBLOCK+ RS-232 DE-9 Connectordownload.svgRockBLOCK+ Mounting Guidedownload.svgAT Command Reference

Other Useful Resources

USA Contact


Europe Contact

+44 (0) 1452 751940
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Price
  • Add to cart
  • Description
  • Custom attributes
  • Custom fields
Click outside to hide the compare bar
Compare Products